IMD fluorine plastic magnetic pump is widely used in such industries as petrochemicals, acid / alkali making, non-ferrous smelting, acidwash in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, elec-tro-plating and radio.
Suitable for conveying strong corrosive, flammable, explosive, toxic and volatile chemical media

No drip leakage
IMD series magnetic drive pump, with shaft seal removed, indirect drive by magnetic coupling has eliminated the troublesome dripping,causing no pollution to the site.Completely eliminate the phenomenon of dripping and leakage.

Non-magnetic eddy current
The isolation and strengthening sleeve made of reinforced carbon fiber or ETPU has high mechanical properties, safe and reliable. The isolation sleeve with full plastic structure completely eliminates the magnetic eddy current phenomenon of the general magnetic pump, and has no heat consumption, high efficiency and energy saving.

Easy to dismantle
With the unique pull-back structure, one person can easily carry out internal maintenance and parts replacement without dismantling the pipe, which greatly facilitates the daily maintenance and maintenance work.

Compact structure
The use of direct coupling structure, magnetic coupling directly installed on the motor shaft, no rolling bearing loss, high efficiency, low noise. The whole pump occupies a small space, saves space and is easy to install.

SINO INDUSTRIAL EQUIPMENT CO.,LTD. mainly export
-Chemical Pump & Valve
-Industrial Motor
-Spare Parts accordingly
Chemical pump & valve refers to fluoroplastic magnetic pump,stainless steel  magnetic pump, fluoroplastic centrifugal pump,stainless steel centrifugal pump and spare parts accordingly etc.
The chemical pump we export is widely used in such industries as petrochemicals, acid / alkali making, non-ferrous smelting, acid wash in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, elec-tro-plating and radio.It has different product series.

The industrial motor cover YE3, YE4, VE5 high efficiency motor, low voltage high power, explosion-proof, high voltage, frequency conversion, braking, Z4 value flow, split horsepower, stainless steel, NEMA standard, new energy vehicle motor, electric forklift traction motor and so on. There are more than 50 series and more than 10000 basic specifications. Meanwhile we also develop non-standard motor for our customers.

Export products cover EU IEC standard, North American NEMA standard and Japanese JIS standard.
Our  factory  has 30 years  and 60 years of manufacturing experience for pump and motor separately.
We work closely with our customers to provide products that meet their demanding specifications, quality and delivery requirements.
We welcome all inquiries and will answer any questions promptly. We will work closely with you to facilitate the successful procurement of the orders you place with us to provide a product that will be produced to your specifications and quality requirements in a timely manner and reasonable priced.
Please contact us about your product interest (large or small qty) and any relevant information.
We assure you of our immediate reply with the hope we can will develop and long and profitable relationship together based on our performance and integrity.
Sincerely,
SINO INDUSTRIAL EQUIPMENT CO.,LTD.

-Professional supplier of industrial equipment.
-Timely,Professional,Concentrative,Patient.

Pump

---

-UMF series Fluorine plastic alloy magnetic pump

-CQB series Fluorine plastic alloy magnetic pump

-IMD series Fluorine plastic alloy magnetic pump

-IHF series Fluorine plastic alloy centrifugal pump(IHF,IHF-D)

-FSB series Fluorine plastic alloy centrifugal pump(FSB,FSB-D)

-ZMD series Fluorine plastic alloy self-priming magnetic pump

-ZFT series Fluorine plastic alloy self-priming magnetic pump

-FZB series Fluorine plastic alloy self-priming centrifugal pump

-CQ series Stainlsess steel magnetic pump(CQ,CQB-P,CQB-L)

-IH series Stainless steel centrifugal pump

-ZCQ series Stainless steel self-priming magnetic pump

-ZX/ZW series Stainless steel self-priming centrifugal pump

-GF series Fluorine plastic pipe pump(GF,GD-F)

-UHB-ZK series Fluorine plastic mortar pump

-FYH series vertical subliquid pump

-LG series Stainless steel screw pump

-BY series Pneumatic or electric diaphragm pump

-MYF-I series Wear resistant and corrosion resistant pump

-Fluorine plastic alloy valve

Motor

---

-High efficiency motor

-High voltage motor

-Explosion-proof motor

-Permanent magnet synchronous motor

-Frequency variable speed regulation motor

-Low voltage motor

-NEMA Standard motor

-Special purpose motor

-Single-phase induction motor

-DC motor

-High-speed motor

-Smart control motor

-New energy vehicle motor

Thank you for your kindly attention to our company.
Whatever if you are interested in our products or want to know more about your interested products,please let us know.
We are happy to answer any of your inquiry and give your help as possible as we can.

Q1: ARE YOU A MANUFACTURER OR TRADING COMPANY? 
We are not only a trading company but also a manufacturer.Welcome to visiting our factory.

Q2:WHAT ARE PRODUCT YOU ARE DEALING WITH?
We mainly export chemical  pump,valves,pipe fitting and industrial motor.
Chemical pump & valve refers to fluoroplastic magnetic pump,stainless steel  magnetic pump, fluoroplastic centrifugal pump,stainless steel centrifugal pump and spare parts accordingly etc.
The chemical pump we export is widely used in such industries as petrochemicals, acid / alkali making, non-ferrous smelting, acid wash in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, elec-tro-plating and radio.It has different product series.
The industrial motor cover YE3, YE4, VE5 high efficiency motor, low voltage high power, explosion-proof, high voltage, frequency conversion, braking, Z4 value flow, split horsepower, stainless steel, NEMA standard, new energy vehicle motor, electric forklift traction motor and so on.

Q3:WHY CHOOSE US?
Advantage: 
-Professional service.
-Low MOQ to start small business.
-Reasonable price with better quality.
-Timely reply.
-Quality guarantee.
-On-time delivery.
-Better after service.

Q4: WHAT IS YOUR MINIMUM QUANTITY?
No MOQ.1pc  is also fine..

Q5:CAN YOU SUPPLY SAMPLES?
Yes,we are very glad to offer you samples.
However the express courier cost from our company to your required address will be upon your account.
Usually we use DHL,TNT,UPS,FEDEX or EMS as the courier. 
It will take 3-7 days to arrive many Europe countries and North America. 
Which express courier we will use, it's up to your convenient or the express charge.

Q6: What’s your payment terms? 
40% downpayment by T/T after confirmed the PI, the balance will be paid before shipment. 

Q7:WHAT IS THE SHIPPING TERMS YOU CAN OFFER?
Different trade terms can be provided,such as EXW,FOB,CFR,CIF etc.

Q8:What is your lead time? 
Normally 15-20 days. The lead time will be adjusted according with the details of order.

Q9: HOW TO CUSTOMIZE PUMP AND MECHANICAL SEALS? 
Application data will be required,we will recommend suitable pump and seal type according with data.Or you could send us drawings, We are well in OEM and ODM.

Q10:WHAT INFORMATION SHOULD WE OFFER FOR QUOTATION?
Medium: ____________ PH: ________
Specific Gravity: _______ 
Medium transmission temperature: _________
Capacity/Flow: ________m³/h 
Head: _________m
Voltage: ____________V 
Frequency: _________Hz
Power:_____________KW

Q11:HOW ABOUT THE WARRANTY?
1 year for main construction warranty.

Q12.WHO WILL BE RESPONSIBLE FOR THE AFTER-SALE SERVICE? 
Around the world, There is always a distributor nearby who has factory-trained filed specialists to provide one-to-one services to you.If not,we also have several professional after-sales service teams in China.We will follow up the client's comments ,then help them get the best solution for maximizing the equipment efficiency and plant maintenance needs. 
For large order, we can send our service team to go abroad to assemble and test.


Q13:HAVE YOU SHOWED ALL OF YOUR PRODUCTS IN YOUR WEBSITE?
No,just part of our products have been showed in our site.
If you are looking for relative industrial products,please feel free to contact us.
sales@sinoequipments.com
sales@sinoie.com

Customized logo is acceptable!
OEM orders are welcome!
Buyer designs are workable!